Home | Profile | Products | Contact | Inquiry

Wind Mill Parts

Base Channel

Earthig Stude

Mounting Angel

Resistor Cover

Gear Pump

	Rotary Gear Pump
	Fuel Injection Gear Pump

>> PRODUCTS

Fuel Injection Internal Gear Pump

Salient Feature:

We are very glad to inform that R.N Feb Tech injection internal gear pumps are prepared by graded cast iron. These gear and shafted Rotor give better performance with closed tolerance to give long life. This FIG pumps is flange mounted kind. These pumps are self priming type produces max. vacuum determined by the cavity between the gear teeth. This pump has modified profile teeth cutting to give accurate capacity with in the pressure range. This pump runs liquid up to 500 cst viscosity and upto temperature 200 °C .

	FIG Pumps is Technically Application for Pumping in Oil Burner, Boiler, Hydraulic, Heating Systems, Fuel Injection with Pressuring and Transfer.
	This Pumps Handling Fuel Like LDO, FO Diseal, HSD and LSHS.
	This Pumps is for use in ?Non Corrosive and Non abrasive Liquids.
	The Mechanical Seal to ensure Zero Leakage at Maximum Pressure.
	This Pumps is Various Type of Industrial Application like can be used as well as Booster Pump for Diseal Locomotive, Oil Transfer and Heating System. This Pump is Built in Pressure Relief Valves and Capacity by-pass.

Dimensions :

MODEL	L1	L2	L3	L4	L5	C1	C2	C3	C4	C5	S1	S2	S3	D1	D2	D3	D4	D5	K1	K2	K3	K4	K5	K6	K7	K8	T1	T2
EPSON-150	39	87	15	22	42.8	46	34.5	80.5	90	49.5	43	28	46	72	54	28	12	10.5	58	14	17	37	22	72	76	148	1/2"BSP	1/4"BSP

	All Dimensions are in millimeters. Unless otherwise stated specifications are subject to charge without prior notice as improvements are made from time to time.
	These pumps give max. pressure of 35 kg/cm2 yet for continuous duty max. recommended pressure is 30 kg/cm2 pump can also be used at 2800 R.P.M the capacity will have approx. Double of normal duty condition. Pump rotation of direction can be clockwise & anti-clockwise as per requirements.
	We wish to associate ourselves with you to serve you better, faster and at reasonable prices .We request your kind co-operation in our endeavour and assure you of our best attention is given a chance.
	Every R.N Feb Tech pump is tested 100% for its performance at 1440 rpm with oil of viscocity 35 cst at normal working temp. and pressure and pressure of 30 kg/cm2.

Approximate Performance Chart :

Sr.	Delivery capacity Lit./ hr with Pressure of 0-35 bar adjustable	In/Out Suction & Delivery	Motor Speed RPM	Motor HP		PARTS	MATERIAL
Sr.		In/Out Suction & Delivery	Motor Speed RPM	15 kg/cm2	30 kg/cm2	PARTS	MATERIAL
1	150	1/2" x 1/2"	2800	0.75	1.5	Pump Body	CI Gr. 20-22
2	300	1/2" x 1/2"	2800	0.75	1.5	Eccentric	CI Gr. 20-22
3	450	1/2" x 1/2"	2800	1	1.5	Idler Gear	SAE - 8620
4	600	1/2" x 1/2"	1440	1	2	Piston	EN - 24
5	1000	3/4" x 3/4"	1440	2	3	Shafted Rotor	EN-19
6	1500	3/4" x 3/4"	1440	2	3	Spring	Spring Steel
7	2000	3/4" x 3/4"	1440	3	5	Mechanical Seal	PB
8	2500	3/4" x 3/4"	1440	3	5	Adjusting Screw	SILVER STEEL
9						Bush	PB

Design Feature

	Positive displacement
	Internal lubrication system
	Available with or without built-in pressure relief valve & external by pass
	Mech. Shaft seal preventing leakage of liquids
	Self inducing
	Direction of rotation R = clockwise L = anticlockwise Locking from shaft end

Hydraulic Data

	Normal flow at 1440 r.p.m. or 2880 r.p.m. with oil viscosity 32Cst.at 37.50C at normal working temperature and 10 kg/cm2 pressure.		Capacity / Range. 40 LPH to 600 LPH. Max. Head of 30 kg/cm2. The pressure and flow indications are to be considered as basic value. They change with different pipe diameter, length or oil viscosity
	Max. liquid temperature 200°C.		Min. viscosity 10 Cst.
	Max. vacuum 600/650 mm Hg.		Max. viscosity 450Cst.

Pump Models	A1	B1	C1	C2	C3	C4	C5	D1	D2	E1 BSP	E2 BSP	F1	F2	F3	F4	F5	G1	G2	G3	H1
KFIG-40	16	92	32	05	11	78	25	54	12	3/8	1/8	36	36	72	126	92	16	29	56	10.5
KFIG-80	16	92	32	09	11	78	25	54	12	3/8	1/8	36	36	72	126	92	16	29	56	10.5
KFIG-120	16	92	32	13	11	78	25	54	12	3/8	1/8	36	36	72	126	92	16	29	56	10.5
KFIG-150	20	112	38	05	12	78	25	54	12	1/2	1/4	45	42	90	147	92	16	34	66	10.5
KFIG-300	20	112	38	09	12	78	25	54	12	1/2	1/4	45	42	90	147	92	16	34	66	10.5
KFIG-450	20	112	38	13	12	78	25	54	12	1/2	1/4	45	42	90	147	92	16	34	66	10.5
KFIG-600	20	112	38	17	12	78	25	54	12	1/2	1/4	45	42	90	147	92	16	34	66	10.5

Applications :

	Light Oil.
	One or two-pipe system.

Technical Data :

	Inlet and return BSP 1/4
	Nozzle outlet BSP 1/8
	Pressure gauge BSP 1/8
	Vacuum gauge BSP 1/8
	Shaft 8 mm
	Suction
	Return and internal by-pass plug
	Nozzle outlet
	Pressure gauge port
	Vacuum gauge port
	Pressure adjustment
	Pressure port (only for "7000" series)

Hydraulic Data

Nozzle pressure range

Factory setting

Gear size 47/57/67

7 - 14 kg
10 - 15 kg

9 kg
10 kg

* Other ranges available on request refer to the specified range of the particular fuel unit.

Operating viscosity

2-12 mm2/s (cSt)

Oil temperature

0 - 600C in the pump

Inlet pressure

2 kg max.

Return pressure

2 kg max.

Suction height

0,45 bars max. vacuum
to prevent air separation from oil

Rated speed

3600 rpm max. (AS 47, AS 57)
2850 rpm max (AS 67)
* except for AS 57 with code date before 000101 (pumps manufactured before jan. 1st, 2000) = 2850 rpm max.

Torque (@ 45 rpm)

0,10 N.m (AS 47/57)
0,12 N.m (AS 67)


	Copyright � 2008 R.N. FEB TECH. All rights reserved.

Home | Profile | Products | Contact | Inquiry